The presser foot adjustment is marked with the setting for each type of fabric to take out much of the guesswork and the feed drop is adjustable from full, through light, to fully dropped. The stitch patterns are displayed boldly on a large dial right on the face of the machine, and you can sew from three-needle positions.
The sensuous finish is a delicious cream and light blue that looks like candy or cake frosting, right down to the script on the name plate.
The original motor was replaced at some point with a strong 1.2 Amp motor from a Japanese Morse sewing machine. We've been through it of course to be sure it's in good working condition and we replaced the wiring inside to make sure it's safe and working at it's best.
Best of all, it's just come off our restoration bench so it's Clean, Clean, Clean, inside and out.
Here at Stagecoach Road Vintage Sewing Machine, we are passionate about what we love doing, which is restoring beautiful vintage sewing machines to the best that they can be. Why? Because we are in love with the styling, the quality of the materials, the workmanship that went into these great machines, which just can't be duplicated today.
You, seriously, cannot buy a home sewing machine this good, new, at any price.
So we search out the best of these fine machines, the ones that are very lightly used, and open them up.
We disassemble the tension, the motor, the bobbin case, take off the face plate, the gear cases, the hand-wheel, the slide plate, the bottom plate, and the back access plate and get down to where the old dried-on oil and grease are.
We clean out the packed-in lint and dust, remove the thread-jams, inspect the hook and the needle plate, and generally look for potential problems.
We take out the needle bar and all it's linkages and the presser foot bar and all it's parts and put them into the alcohol bath to remove the years of sticky oil buildup that bogs down a vintage machine and robs it of speed and power.
We take out as much of the stitch pattern forming mechanisms as needed to get deep into each machine to free it up and then lubricate each moving part. The main shafts, bearings, and other parts get cleaned in place to make each machine run as free and light as a new machine.
We use high-quality lubricants in all the right places, getting into those spots that aren't as obvious to the average user, and clean out the old hardened grease from the gear cases, then we test the machines to make sure that they are sewing at their best.
Each machine is tested at the restoration bench and then tested again by our quality control technician to be sure we haven't missed anything. She's not only a master technician, she's a seamstress who knows what a seam should look like.
After all of this, each machine is carefully detailed, to bring out it's original beauty. These are some of the finest examples of mid-century styling that you'll find, and we want each machine to be the very best that it can be.
We don't try to hide the scratches or chips that have been honestly earned in service to their craft, and rarely re-paint because we prefer the original paint in most cases. We like the wabi-sabi beauty of a working sewing machine. And if the stickers from the various repair shops they've seen aren't too damaged we leave those, too, so you can see were your new machine has been in it's lifetime.
Finally, because we believe in these wonderful, built-to-last machines and in the work we do, we offer this free Lifetime Guaranty:
If you ever have a problem with one of our restored vintage machines, just bring or send it back to us and if we can fix it, we'll do so for free. You, of course, will pay for any parts or shipping.
Sorry to say that this one is SOLD!