Singer 223 Vintage Japanese Sewing Machine

Restored Singer 223 Vintage Japanese Sewing Machine

Here is a fine Singer sewing machine made in Singer's Japan factory, in the late 1960s, and the Japanese quality is evident in every facet of the machine.

Restored Singer 223 Vintage Japanese Sewing Machine

This is a straight-stitch and zigzag machine with a built-in blind stitch. It uses standard needles and standard class 15 bobbins, and it features an easy, bed-mounted feed drop control.

Restored Singer 223 Vintage Japanese Sewing Machine

With it's elegant styling and high quality finish, this is a beautiful and durable piece of precision machinery. It has the power to sew multiple layers of heavy material as well as medium and lightweight fabric. It's renowned and sought after by sewing experts, everywhere.

Restored Singer 223 Vintage Japanese Sewing Machine

As you will see in the photo, it's had the wrong light bulb in it at some point, either too wide or too hot, and the paint on the light shade is darkened as a result. The light works fine and is safe, it's just a little discolored around the bulb area.

Restored Singer 223 Vintage Japanese Sewing Machine

This Japanese Singer 223 has just come off our restoration bench so it's Clean, Clean, Clean, inside and out, and it runs and sews perfectly.

Here at Stagecoach Road Vintage Sewing Machine, we are passionate about what we love doing, which is restoring beautiful vintage sewing machines to the best that they can be, because we are in love with the styling, the quality of the materials, the workmanship that went into these great machines, which just can't be duplicated today.

You, seriously, cannot buy a home sewing machine this good, new, at any price.

So we search out the best of these fine machines, the ones that are very lightly used, and open them up.

We disassemble the tension, the motor, the bobbin case, take off the face plate, the gear cases, the hand-wheel, the slide plate, the bottom plate, and the back access plate and get down to where the old dried-on oil and grease are.

We clean out the packed-in lint and dust, remove the thread-jams, inspect the hook and the needle plate, and generally look for potential problems.

We take out the needle bar and all it's linkages and the presser foot bar and all it's parts and put them into the alcohol bath to remove the years of sticky oil buildup that bogs down a vintage machine and robs it of speed and power.

We take out as much of the stitch pattern forming mechanisms as needed to get deep into each machine to free it up and then lubricate each moving part. The main shafts, bearings, and other parts get cleaned in place to make each machine run as free and light as a new machine.

We use high-quality lubricants in all the right places, getting into those spots that aren't as obvious to the average user, and clean out the old hardened grease from the gear cases, then we test the machines to make sure that they are sewing at their best.

Each machine is tested at the restoration bench and then tested again by our quality control technician to be sure we haven't missed anything. She's not only a master technician, she's a seamstress who knows what a seam should look like.

After all of this, each machine is carefully detailed, to bring out it's original beauty. These are some of the finest examples of mid-century styling that you'll find, and we want each machine to be the very best that it can be.

We don't try to hide the scratches or chips that have been honestly earned in service to their craft, and rarely re-paint because we prefer the original paint in most cases. We like the wabi-sabi beauty of a working sewing machine. And if the stickers from the various repair shops they've seen aren't too damaged we leave those, too, so you can see were your new machine has been in it's lifetime.

Finally, because we believe in these wonderful, built-to-last machines and in the work we do, we offer this free Lifetime Guaranty:

If you ever have a problem with one of our restored vintage machines, just bring or send it back to us and if we can fix it, we'll do so for free. You, of course, will pay for any parts or shipping.

Sorry, it's SOLD!